515 Madison St

Renovation (Non-Structural) Permit

Remove existing roofing material
Repair and/or replace underlayment as necessary
Install new 12” x 18” natural slate (grey/green), using copper nails
Install/repair half round copper gutters and flashing, drip edge, step flahing apron and counter flashings as needed.
Install/reinstall ceramic or concrete V-style or terra cotta ridge tiles.
Metal cap-flashing on the parapets or chimneys is not allowed
wire brucsh teh parapet wall around the roof that is curretnly rubbed with roofing cement. Apply mortar cap and fresh stucoo to parapet wall using VCC stucoo and mortar mix only.
Stucco: Base coat consists of 2 coats, doubled up work of 5/8" total thickness. Proportioned as follows:
• no greater than 1:12 part Portland Cement, to
• 3 parts lime, and
• 9 parts sand,
• 6 lbs./cubic yard hair or fiber, and
• enough water to form a workable mix.

Note: Trash chutes are required for removal of debris from all roofs. All work must conform to standard VCC policies & guidelines. Permit does not allow for cap flashing on parapets, chimneys or surrounding walls. Torch-applied roofing is not permitted in the Vieux Carré.

Ref code HS2RHQ

Documents

• TEMPORARY ESTIMATE
• Building Permit.pdf
• Receipt.pdf