839 Orleans Ave

VCC General Work Permit

to repair cracks on back side of gable end wall using VCC approved stucco mix, paint to match
replace broken slate tiles at ridge to match existing 12"x24" Vermont slate (gray/ green)
reset ridge tile in VCC approved mortar
Stucco: Base coat consists of 2 coats, doubled up work of 5/8" total thickness. Proportioned as follows:
• no greater than 1:12 part Portland Cement, to
• 3 parts lime, and
• 9 parts sand,
• 6 lbs./cubic yard hair or fiber, and
• enough water to form a workable mix.
Finish coat is 1/4" in total thickness proportioned as follows:
• No more than 1 Part Portland cement,
• 3 Parts Lime,
• 9 Parts Sand,
• Enough water to form a workable mix.
PREPACKAGED MIXES ARE NOT PERMITTED.
LATH OF ANY KIND IS NOT ALLOWED.