1010 Saint Ann St, 1010 and 1012 St ann st

VCC General Work Permit

to remove and replace loose stucco where necessary per VCC approved stucco mix.
Stucco: Base coat consists of 2 coats, doubled up work of 5/8" total thickness. Proportioned as follows:
• no greater than 1:12 part Portland Cement, to
• 3 parts lime, and
• 9 parts sand,
• 6 lbs./cubic yard hair or fiber, and
• enough water to form a workable mix.

Finish coat is 1/4" in total thickness proportioned as follows:
• No more than 1 Part Portland cement,
• 3 Parts Lime,
• 9 Parts Sand,
• Enough water to form a workable mix.

PREPACKAGED MIXES ARE NOT PERMITTED.

LATH OF ANY KIND IS NOT ALLOWED.

The resulting mix should range in color from off-white to beige but should not be grey in color.

Note: RATIO OF PORTLAND CEMENT NOT TO EXCEED 1:12.
An incorrect mortar can damage an historic building and it materials.