514 Chartres St

VCC General Work Permit

***ALL WORK TO MATCH EXISTING
To prepare for painting by washing using a low water pressure (400 psi max) and/or sanding (rotary sanders cannot be used), making minor millwork and masonry repairs as necessary to match existing conditions (masonry mix must be soft, with maximum Portland cement content not to exceed 1 part to 12) and to paint as follows to match existing conditions: 
***ALL PAINT COLORS TO MATCH
NOTE: All shutter hardware to match adjacent surface; hinge attached to shutter should match shutter color, and hinge attached to trim should match trim. Shutter hardware should not be painted black. Additionally, outriggers under balconies or galleries should be painted white as they are not decorative ironwork elements.
Failure to exactly match permit specified colors will result in a VCC violation and mandated repainting.
This permit prohibits the application of the following exterior coating materials and paints: sealers, ceramic coatings/paints, elastomeric coatings/paints, waterproofing/water repellent coatings.
• Remove deteriorated floor boards, stringers, and fascia boards.
• Install new 3"x4" beaded stringers, 5/4x4 wood T&G floorboards, and 7/8" fascia with ½" bead, all as per VCC Standard Detail Sheet No. 12 (attached).